65″ in a new-build living room
- Drywall
- Fixed mount
- Cables inside the wall
Bracket bolted into the studs, then a hole cut for a recessed power kit so the cable runs inside the wall instead of down the plaster.
Measured, leveled, lagged into studs · Tampa Bay, 7 daysMeasured, leveled, into studs · Tampa Bay
We find the studs, set the height from your seat and run the wires inside the wall. Firm price before anyone drives out.
Call or text, 8am–8pm, 7 daysor pick your size below ↓

Power + HDMI inside the wallrecessed kit, to code · $99
01What we mount
A stud wall and a brick chimney need different anchors, bits and planning. Every add-on has its price on the page — no “call for a quote” runaround.

Cords routed inside the wall with a proper in-wall power kit — nothing hanging below the screen.
Height and tilt worked out so you are not craning your neck, with heat checked before we drill.

Masonry anchors and the right bit for the material. Solid walls need different hardware than drywall.
Recessed boxes and slim mounts so the panel sits tight to the wall the way it was designed to.

Moving out or rearranging a room — we take the set down, patch the holes, and hang it again.
Soundbar brackets, center-channel shelves, and speaker wire tucked out of sight.
02Prices
Labor by screen size, then only the mount and extras you actually need. You hear the total before anyone drives out.
Labor · by screen size one flat price
Add-ons · only what you need mount supplied or yours
Real total
Drywall, tilting mount, cables left exposed
Real total
Drywall, full-motion mount, in-wall concealment
Real total
Masonry wall, tilting mount, concealment above the firebox
03Our work
No stock photos. Our own phone clips from Tampa homes — what was done, and what it cost.
Bracket bolted into the studs, then a hole cut for a recessed power kit so the cable runs inside the wall instead of down the plaster.
Height measured against the seating position first, then a swing-arm mount so the screen turns towards the desk or the bed.
Feet off, plate assembled on site, studs marked, and the screen set at the height where the cabinet below still works as a media unit.
04How it works
In Tampa, a call before midday usually gets an afternoon slot the same day.
Screen size, wall material, whether it goes over a fireplace. Two minutes on the phone or through the form.
You hear the number before anyone comes out. No hourly meter running, no surprise line items at the end.
Studs located, bracket leveled, cables concealed, and we clean up the dust before we leave.
05The details
Most mounting problems don’t appear on day one. They appear six months in, when the bracket has crept or the wall has cracked.
A mount anchored into drywall alone will eventually pull out with a large screen on it. We locate the framing and bolt into it.
Electronics above a working firebox can cook slowly. We measure before committing to the spot instead of finding out later.
In-wall power kits exist because running a standard cord inside a wall is a fire risk. We use the rated hardware.
You get a firm number before the visit. If something unexpected turns up in the wall, we stop and talk to you first.
If the mount fails or works loose within two years, we come back and fix it at no charge.
06Service areas
Based in Tampa and working the Bay area seven days a week. Same-day is most realistic in Tampa and Brandon.
Most of our work is here — a call before midday usually gets an afternoon slot the same day.
TV mounting in TampaA short run for us, seven days a week — downtown condos included.
TV mounting in St. PetersburgWe cross the bay most days. Beach-side jobs we book earlier, before the bridge traffic.
TV mounting in ClearwaterTwenty minutes from our Tampa base, so same-day is realistic more often than not.
TV mounting in BrandonThe southern edge of our map, worked on a set schedule — pick the day that suits you.
TV mounting in SarasotaOn the same southern run as Sarasota — booking the two together gets an earlier slot.
TV mounting in Bradenton07FAQ
Call or text — 8am to 8pm, seven days a week.
(813) 536-3533Usually yes, but it depends on the heat. We check the temperature above the firebox and look at how the mantel projects. If the wall gets too hot for the electronics, we will say so and suggest a different spot rather than take the job and hope for the best.
Not if the wall allows concealment. On drywall we run the cables inside the cavity with a recessed power kit, which is the code-compliant way to do it. On solid brick or concrete we use a low-profile raceway painted to match, since you cannot fish a cable through masonry.
We can, or you can use one you already bought. If you bought your own, have the box handy when you call so we can check it actually fits your screen and holds the weight.
A straightforward drywall install with concealed wiring runs about an hour to ninety minutes. Brick, stone, and over-fireplace jobs take longer because of the drilling and the extra care around the mantel.
Tampa and the surrounding Bay area, including Clearwater, St. Petersburg, Brandon, Sarasota, and Bradenton. If you are on the edge of the map, call and ask — we will tell you honestly whether we can get to you.
08Free quote
Send the details and we’ll call back with a firm price. If it’s a job we shouldn’t take — wrong wall, too much heat, a mount that won’t hold your screen — we’ll tell you that too.
Call or text · 7 days a week(813) 536-3533